ARAI MX-V BARCIA FROG HELMET

Arai MX-V Barcia Frog Helmet

Loaded with below features:

• Super Complex Laminate Construction The latest aerospace fibres, with 30% more strength in extension & bending resistance than standard fiberglass comprises the majority of the SCLC shell. 
• While considerably more expensive than most fiberglass (and in fact more than many Carbon Fibre materials), this “Super Fibre” provides incredible flexibility and strength, which maximizes shell integrity. 
• A specially designed “mechanically expanded fibre mat,” sandwiched between the inner and outer layers of Arai´s proprietary Super Fibre Laminates, is used to reinforce and bond these two Super Fibre layers without adding significant weight to the helmet.
• Easy to clean diffusers create a strong venture vacuum at the rear. Centre top vent for increased airflow. 
• Under-peak air intake collects and directs cool air into the helmet. Inner chin vent shutter prevents debris coming into the helmet in dusty riding conditions. 
• Goggle ventilation and lower side vents.
• The new Top Vent provides 11% more airflow than the previous Vent. 
• The new bigger switch makes opening and closing easier. 
• The new Top Vent has three positions; closed, half open and fully open to adjust the airflow and prevent water intrusion when fully closed.
• Open and close the chin bar vents from the inside to prevent debris coming into the helmet in dusty riding conditions.
• Creates a tremendous amount of venturi vacuum at the rear. Can be easily removed (for cleaning) or replacement.
• Cheek pads/ear cups may be easily removed. All parts (replaceable or not) can be cleaned with lukewarm water and mild soap. 
• Rinse well after cleaning and never dry in direct sunlight or near a heat source. Interior parts in different size thickness are available for a custom fit for every rider.
• All parts (replaceable or not) can be cleaned with lukewarm water and mild soap. 
• Rinse well after cleaning and never dry in direct sunlight or near a heat source. Interior parts in different size thickness are available for a custom fit for every rider.
• Allows easier access to an injured rider. By pulling the orange tabs integrated in the pads, the cheek pads slide out. 
• Making helmet removal easier for trained medical personnel and rescuers. Minimising the risk of additional injury.
• Works in conjunction with the dual-pivot® chin vent to better direct fresh air to the inside surface of the shield while at the same time directing hot breath down and away from the inside surface of the shield.
• All-day comfort with the Arai interior fit and shape together with the finest liner materials and the extensive ventilation system. 
• And thanks to the perfect balance and weight distribution of the helmet, you hardly notice you are wearing an Arai.